Crestron TPMC-10-DSW Bedienungsanleitung PDF herunterladen (Seite 7)

Crestron MMK-8X-DSW & WMKM-8X-DSW Mud Mount Kits

Secure Adjustment Plates to PMK-8X-DSW (or BB-8X-DSW)

PUSH-ON FASTENERS (4)

(2004121)

PMK-8X-DSW

ADJUSTMENT PLATES (2)

(2004825)

2. Slide a push-on fastener over each pin of the PMK-8X-DSW (or

BB-8X-DSW) to loosely secure the adjustment plate and the mounting

plate. Do not push the push-on fasteners all the way down onto the pins.

Slide them on enough to keep the adjustment plate and mounting plate as

one adjustment/mounting plate assembly.

3. Use the second adjustment plate and repeat steps 1 and 2 using the lower

two PMK-8X-DSW (or BB-8X-DSW) pins.

NOTE: When installing into the PMK-8X-DSW, verify that the 18 AWG bus wire

securing the cables for the TPMC-8X-DSW remains attached.

4. Insert the symmetrical mud ring plate into the opening, as shown in the

illustration on the following page.

Installation Guide – DOC. 6581B Mud Mount Kits: MMK-8X-DSW & WMKM-8X-DSW • 5

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Keine Kommentare

Crestron TPMC-10-DSW Bedienungsanleitung Seite 7