Crestron CEN-COM Installationsanleitung PDF herunterladen (Seite 17)

Crestron CEN-HPRFGW High Powered RF Gateway

• Gateways on adjacent channels should be at least 12 feet apart.

• Gateways on non-adjacent channels should be at least three feet

apart.

When installing a CEN-HPRFGW near a Wi-Fi access point, for

optimum performance, keep the following in mind:

• Gateways on RF channels adjacent to operating Wi-Fi channels

should be placed at least 12 feet from the nearest Wi-Fi access

point.

• Gateways on RF channels that are non-adjacent to Wi-Fi channels

should be located at least six feet from the nearest Wi-Fi access

point.

For more information on RF channels and their interaction with the

Wi-Fi spectrum, refer to “Appendix A: The RF Spectrum” on page 31.

For additional information on optimal gateway placement, refer to

“Appendix B: Optimum RF Reception Guidelines” which starts on page

32.

Hardware Hookup

Make the necessary connections as called out in the illustration that

follows this paragraph. Refer to “Network Wiring” on page 10 before

attaching the 4-position terminal block connector. Apply power after all

connections have been made.

When making connections to the CEN-HPRFGW, consider the

following:

• Use Crestron power supplies for Crestron equipment.

• The included cable cannot be extended.

Operations & Installation Guide – DOC. 6587B High Powered Gateway: CEN-HPRFGW • 13

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

Keine Kommentare

Crestron CEN-COM Installationsanleitung Seite 17