Crestron PSPHD Spezifikationen PDF herunterladen (Seite 43)

Crestron PSPHD PROCISE 7.3 Surround Sound Processor

Operations Guide – DOC. 6837C PROCISE 7.3 Surround Sound Processor: PSPHD • 37

“AMPLIFIER PAIRING” Screen

AMPLIFIER PAIRING

Crestron Amplifier Connection

Network Direct

SOURCE

MODE

SETUP

INFO

6. Turn the selection knob to highlight Network and press the selection

knob.

NOTE: The PSPHD and the PROAMP amplifier must be set to the

same connection type.

NOTE: When using the “Network” connection type, the PSPHD and

the PROAMP amplifier must be on the same subnet.

7. When prompted, press either of the following buttons on the PROAMP

amplifier while the appropriate LEDs blink (about two minutes):

• RESET (front panel)

• OVERRIDE/SETUP (rear panel)

NOTE: If the RESET or OVERRIDE/SETUP button is not pressed

within two minutes, the LEDs stop blinking and the PSPHD display

returns to the “NETWORK SETUP” menu.

8. When the PSPHD is successfully paired with the PROAMP amplifier, a

message is displayed indicating the successful pairing.

9. On the PSPHD, press the selection knob to exit. The display returns to

the “NETWORK SETUP” menu.

10. Reboot the PSPHD as follows:

a. Press the HOME button to return to the “INSTALLER MENU”.

b. Turn the selection knob until Exit Installer Mode is displayed and

press the selection knob.

• Direct

When using a “Direct” connection, the PSPHD is directly connected to the

PROAMP amplifier as shown in the following diagram.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 69 70

Keine Kommentare

Crestron PSPHD Spezifikationen Seite 43